The rainbow loom bracelet making kit is usually used to create bracelets made from rubber bands in a very fast speed. The loom normally has instructions, which are used in creating various styles of bracelets having equally various difficulty levels. The rainbow looms also comes with its tutorials which assists you in coming up with new pieces of art whenever you use the loom. It also includes a mini loom, a hand held loom, a hook, and up to 600 non-latex rubber bands in different colors. This toy was invented by chance by a Malaysian immigrant called Cheong Choon Ng who was also a crash test engineer for Nissan in Detroit. This person just had an idea to run through his mind as he watched his daughters weaving bracelets from small rubber bands and used them on their hair.
He then picked up some rubber bands and tried to do what his daughters were doing but found it quite a challenge. Therefore, he proceeded to his basement, stuck pushpins in a long but thin piece of wood, and started to weave a bracelet. He played around with the design and kept imagining things like how the design would function with hollow pegs, which could allow crotchet needles to go through them passing the rubber bands around each other and making a weave. When he made his final product, the loom, he patented it and marketed it among manufacturers.
The Rainbow Loom Kit
The rainbow loom bracelet making kit usually contains a number of items that can create up to twenty-four bracelets. These items include the instructional manual, the mini-rainbow loom that resembles a crochet needle, the C-clips which are 24 in number and are used for fastening the bracelet, the more than six hundred mixed color rubber bands, and a rainbow loom. The instruction manual or guide contains a number of beautiful pictures, which will take you through the procedure as you make your first bracelet, which is normally simple and has single patterns. The mini-rainbow loom is used to do this.
In addition, complex images are also included in the instructional manual, which you will use to advance your experience. The rubber band bracelets can be made in various shapes and designs including the diamond, honeycomb and the rhombus shapes. Creating these designs need more time and expertise; however, they are fun to make. You may also try out the Twistz refill band colors such as neon orange, neon green, fuchsia, and the glow in the dark color. With such colors you can be amazed at the pieced of art and jewelry your kids can come up with. The different colors of the rubber bands enable one to come up with different patterns such as rings, bracelets and a mini handbag.
How to Use the Rainbow Loom Bracelet Making Kit
To begin with, you need to open the mini rainbow loom that comes with the kit and hold it in your hand. This mini loom is usually blue in color. Then you need to place the hook section, which is yellow in color down for a minute. Then take the Twistz band, open it and put it between the hook of the mini rainbow loom. After this you will need to pull the band so that it is tightly closed bringing it together like a string towards your left side. Then place the band around the second hook area, which is open and pull it to your right side. Then open the band and again put it over the hook. These steps should give you the shape X that should be in the middle of the mini rainbow loom.
Once the above steps are followed correctly, you will now proceed to making the bracelet’s rubber band string. This can be done easily using the hook, which resembles a crotchet and is yellow in color. You may take the hook and attach a rubber on it. Weave the hook beneath the rubber hook part of the mini rainbow loom then take the rubber halfway to the opposite side as you hook the other part of it on the part of the needle that looks like a crotchet. The result of this should be the shape U.
After that, you may then pick up another separate band and place it on mini loom’s hook portion and pull the rubber band through. This can be achieved by turning it downwards while twisting your wrist and taking it through the rubber band in the U shape. This step may be repeated at least 25 times in order to make a single pattern formation of a bracelet. Once you are done the looping you may take off the rubber band from the mini loom. Then attach the opposite end of the rubber band onto the C clip to enable you fasten the bracelet in a good way. Once done, your bracelet is ready.
The rainbow loom bracelet making kit has become every kid’s obsession because of the creativity they always want to show. These rainbows loom are normally recommended for persons that are 7 years old and above since they already understand the basics of using the toy. With this rainbow loom many people have been able to come up with beautiful designs of bracelets, which can be worn, be a wide group of people. Such bracelets can be used as precious gifts for such occasions as birthdays, especially for those who love art and crafts. In addition to being gifts, the bracelets can also be a great source of income and a young person can use it to start fending for him or herself. Therefore, this would be a combination of fun together with business.
In order to have such an exciting experience and create a fun activity for your kids, the rainbow looms is one this you must have in your home. The looms are usually available from online suppliers and since it is an upcoming market trend it is important that you try your best to avoid any scams or companies that may pretend to be selling the real thing yet they do not even know how it works. Take your time to shop around and find the most affordable but an original kit for your kids.